Menu
Menu
Low price and high reliability
105℃ Output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With short-circuit and overload protection
100% full-load burn-in test
Installed with EMI filter, minimum wave
| Model | |||||
|---|---|---|---|---|---|
| Specification | S-500-12 | S-500-15 | S-500-24 | S-500-36 | S-500-48 |
| DC output voltage | 12V | 15v | 24v | 36v | 48v |
| Rated output current | 37.5A | 33.3A | 20.8A | 13.8A | 10.4A |
| Output current range | 0-37.5A | 0-33.3A | 0-20.8A | 0-13.8A | 0-10.4A |
| Wave and noise (Note: 3) | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p |
| Voltage accuracy | ±1% | ±1% | ±1% | ±1% | ±1% |
| Inlet stability (Note: 4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability (Note: 5) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| DC Output power | 450W | 500W | 500W | 500W | 500W |
| Efficiency | 0.74 | 0.78 | 0.82 | 0.82 | 0.83 |
| AC input voltage range | 176~264VAC 50~60Hz； | ||||
| Input current | 4A/230V | ||||
| AC Inrush current | Cole-start current 6.5A/115V 4A/230V | ||||
| Leakage current | ＜3.5mA/240VAC | ||||
| Overload proctection | 105%~150% Type: Cut off output Reset: auto recovery | ||||
| Over-voltage protection | Short-circuit Over-load Over-heat | ||||
| High-temperature protection | IP67 | ||||
| Temperature coefficient | ±0.03%/℃（0~50℃） | ||||
| Setup, rise, hold up time | 200ms, 100ms, 20ms | ||||
| Vibration | 10~500Hz, 2G 10min,/1cycle, period for 60min, Each axes | ||||
| Withstand voltage | Input and output internal: 1.5KVAC, Input and enclosure: 1.5KVAC, Output and enclosure: 0.5KVAC | ||||
| Isolation resistance | Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100MΩ | ||||
| Working temperature and humidity | -10℃-60℃（Refer to output derating curve），20%~90%RH | ||||
| Stoerall dimension | -20℃~+85℃,10%~95%RH | ||||
| Overall dimension | 240x125x64mm | ||||
| Weight | 1.25kgs | ||||
| Safety standards | Meet UL 1012 requirement (Not apply for the mark) | ||||
| EMC standards | Meet the FCC PART15J condition CLASS B |
